Yamaha AW2816 MIDI Remote Template AW2816 --REMOTE --> NUENDO Installation Using a MIDI cable, connect the MIDI OUT of a MIDI sequencer to the MIDI IN of the AW2816. Load the "nuendo.mid" bulk data file into the MIDI sequencer and start playback to send the data to the AW2816. NUENDO Settings 1. From the Menu bar, select Devices > Device Setup 2. In the "Devices" section, select Generic Remote. 3. Under "Setup," click the Import button and locate the Nuendo setup file (aw2816.xml). 4. From the MIDI Input/Output pop-up menu, choose the MIDI port that's connected to the AW2816. 5. Click the Apply button and then the OK button, and you're done. Feature Overview This template makes it possible to control the mixer parameters of Nuendo music production software remotely with the AW2816. Main Functions Remote control over 16 channels of NuendoÕs VST mixer (fader, mute and pan) Detailed Template Settings AW2816 PLG150-AN Window Control Remote Channel Remote Function Remote A On 1-8 VST CH. 1–8 Mute Fader 1-8 Fader Remote B On 1-8 VST CH. 9–16 Mute Fader 1-8 Fader Remote C On 1-8 VST CH. 1–8 Pan Center Fader 1-8 Pan Remote D On 1-8 VST CH. 9–16 Pan Center Fader 1-8 Pan NOTE: LEDs will display in reverse of the usual AW display. NOTE: This template is for controlling Nuendo mixing parameters from the AW2816. Bi-directional communication between the AW2816 and Nuendo is not possible. If you change the parameter settings on the Nuendo side, they will contradict the current status of the AW2816. Please visit the AW2816 website for information related to the AW2816. http://www.aw2816.com (C) 2002 YAMAHA CORPORATION All Rights Reserved